What is the Transducer Pro™ Submersible Level Transmitter?

Discover more about our Transducer Pro™ Submersible Level Transmitter, an effective device for reading atmospheric pressure in wastewater or slurry tank applications.

4-20mA Submersible Wastewater Level Transmitter

The Transducer Pro™ Submersible Level Transmitter is built to accurately measure liquid levels by sensing pressure compared to atmospheric conditions. It uses a pressure-sensitive (piezoresistive) sensor inside a tough 316 stainless steel housing for durability and corrosion resistance. Designed for harsh environments, the Transducer Pro™ performs reliably in wastewater and slurry applications where strength and consistency really matter.

Comes Standard With:

Built-in lightning and surge protection
Large-diameter, non-clogging 316 stainless steel diaphragm seal designed for durability and damage resistance
Maintenance-free vent filter for long-term reliability
Excellent chemical compatibility thanks to 316 SS construction and ETFE cable

Built for Demanding Applications:

Wastewater
Sludge pits
Clarifiers
Digesters
Aluminum tanks
Chemical storage tanks
Oil tanks
Sumps
Reservoirs

Available Options & Configurations

Max Water Levels

11ft (3m)
23ft (7m)
35ft (11m)
46ft (14m)

Pressure Upper Limits

5 PSI
10 PSI
15 PSI
20 PSI

Cable Lengths

50ft (15m)
100ft (30m)

Check Out the Transducer Pro™ Product Page

Transducer Pro™ Submersible Level Transmitter

4-20mA Submersible Watewater Level Transmitter

The Transducer Pro™ Submersible Level Transmitter is specifically designed to measure the liquid level in a wastewater or slurry tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, which is encased in 316 stainless steel housing. Transducer Pro™ is perfect for wastewater and slurry applications with features to protect the unit from these demanding applications.

The large diameter 316 stainless steel diaphragm seal is non-clogging and damage-resistant to floating solids. It comes equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance-free filter, which prevents particulate or water droplets from entering the transducer.